{"title":"LEDs","description":"\u003cp\u003eBrowse our LEDs collection. Hot Sale.\u003c\/p\u003e","products":[{"product_id":"64x32-rgb-led-matrix-5mm-pitch","title":"64x32 RGB LED Matrix - 5mm pitch","description":"\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 64x32 RGB LED Matrix Panel (5mm pitch) brings full-colour visuals to your projects. With 2048 bright LEDs arranged in a 64x32 grid, it’s perfect for signs and animations. It works with Raspberry Pi, Arduino Mega, and similar boards using a 5V power supply.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of buses and bus stops, to display animations or short video clips. We thought they looked really cool, so we picked up a few boxes of them from a factory.\u003c\/p\u003e\n\u003cp\u003eThis version is the 5mm pitch 64x32 RGB LED Matrix. Please note, you cannot use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB, or another device that can handle displaying to RGB matrices and has plenty of RAM.\u003c\/p\u003e\n\u003cp\u003eThis is a lot like our 6mm Grid 32x32 RGB LED matrix panel, but it's about twice as wide and looks excellent from far away. If you are looking for other pitches of 64x32 matrix, check out our 3mm pitch, 4mm pitch, or 6mm pitch 64x32 RGB LED Matrices.\u003c\/p\u003e\n\u003cp\u003eThis matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back, there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.\u003c\/p\u003e\n\u003cp\u003eThese displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet).\u003c\/p\u003e\n\u003cp\u003eThese panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePanel weight with IDC cables and power cables: 453g\u003c\/li\u003e\n\u003cli\u003eCompatible with M3 mounting screws\u003c\/li\u003e\n\u003cli\u003e5V regulated power input @ ~4A (with all LEDs on)\u003c\/li\u003e\n\u003cli\u003e5V logic\u003c\/li\u003e\n\u003cli\u003e1\/16 scan rate\u003c\/li\u003e\n\u003cli\u003eIndoor display, 160-degree visibility\u003c\/li\u003e\n\u003cli\u003eDisplays are 'chainable' - connect one output to the next input - but our Arduino example code does not support this yet\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThere's a lot of LEDs! You may need up to 4A per panel. \u003c\/span\u003eWe suggest our 4A regulated 5V adapter\u003cspan\u003e and then \u003c\/span\u003econnecting a 2.1mm jack\u003cspan\u003e. Please check out our tutorials for more details!\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese displays require 13 GPIO pins to control. You may have to use consecutive or special pins, depending on the driver firmware. We'll be honest: folks who try to wire directly are usually not successful, it's easy to get confused and mis connect. For that reason, we strongly recommend a ready-to-go board or adapter that makes wiring as easy as plugging in the cables and powering with 5V.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 318mm x 158mm x 15mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePanel weight with IDC cables and power cables: 453g\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThe back of the matrix will either be green or black\u003c\/li\u003e\n\u003cli\u003eThis product may come with one or two power connections\u003c\/li\u003e\n\u003cli\u003eThere may be a short coupling data cable installed in the centre\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of November 20, 2020\u003c\/strong\u003e we no longer include mounting screws or magnets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCAD drawing\u003c\/li\u003e\n\u003cli\u003eRGB LED Matrix Basics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 64x32 RGB panel,\u003c\/li\u003e\n\u003cli\u003e1x IDC cable\u003c\/li\u003e\n\u003cli\u003e1x plug-in power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281270844,"sku":"wyk1787257299697","price":39.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/64x32-rgb-led-matrix---5mm-pitch_1.jpg?v=1787257307"},{"product_id":"5050-cool-white-led-w-integrated-driver-chip-10-pack-6000k","title":"5050 Cool White LED w\/ Integrated Driver Chip - 10 Pack (~6000K)","description":"\u003cp\u003eFor those of us who are maybe a little tired of rainbows, we now have 'smart LEDs' in monochrome! Make your own smart \u003cstrong\u003eCool White\u003c\/strong\u003e \u003cstrong\u003eLED\u003c\/strong\u003e arrangement with the same integrated LED dr that is used in our new fancy DotStar strips.  Unlit, the color resembles a yellow Starburst. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 24 bit high-frequency PWM. The phosphor helps diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right)\u003c\/p\u003e\u003cp\u003eThis tiny 5050 (5mm x 5mm) SMD LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. If you want to prototype with these, we recommend our 5050-size LED breakout PCBs, solder them on for a breadboard-friendly package\u003c\/p\u003e\u003cp\u003eThey're also a great upgrade for people who have loved and used NeoPixels for a few years but want to use the same kind of technology for monochromatic lighting. DotStar LEDs use generic 2-wire SPI, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required. They also have much higher PWM refresh rates, so you can do Persistence-of-Vision (POV) and have less flickering, particularly at low brightness levels.\u003c\/p\u003e\u003cp\u003eLike NeoPixels, DotStar LEDs are 5050-sized LEDs with an embedded microcontroller \u003cstrong\u003einside the LED\u003c\/strong\u003e. You can set the brightness of each of 3 individual cool white dies epoxied into the case. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or disconnect unwanted LEDs at the end. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs for you.\u003c\/p\u003e\u003cp\u003eAnother nice thing about DotStars is their high PWM rate. You only have to set the brightness data for each pixel LED once, and then the LED+built-in-chip will handle the PWMing. On NeoPixels, this PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses and if the strip is moving in any way.  DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComes in a package with 10 individual LEDs.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWe have a tutorial showing wiring, power usage calculations, example code for usage, etc. for DotStars Please check it out!\u003c\/b\u003e Please note that the tutorial and code talk about RGB, but of course, this LED is just WWW, three individual white LEDs instead.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eSingle LED: 5mm x 5mm \/ 0.2\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eWe don't have any more specifics about this particular LED other than it is 6000-6500K color temp and seems to have 3 white LEDs in place of the normal Red\/Green\/Blue\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nSK9822 Datasheet \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281303612,"sku":"pul1787257300597","price":3.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/5050-cool-white-led-w-integrated-driver-chip---10-pack-6000k_1.jpg?v=1787257308"},{"product_id":"flexible-8x32-neopixel-rgb-led-matrix-discontinued","title":"Flexible 8x32 NeoPixel RGB LED Matrix [Discontinued]","description":"\u003cp\u003eFor advanced NeoPixel fans, we how have a bendable, flexible 8x32 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be \u003cstrong\u003egently bent and curved\u003c\/strong\u003e around surfaces\u003c\/p\u003e\u003cp\u003eYou can use this matrix just like any other NeoPixel-compatible product, and we even have NeoMatrix code that will let you use the matrix as a 8x32 grid for drawing on without having to do all the icky math Just initalize NeoMatrix with\u003c\/p\u003e\u003cpre\u003eAdafruit_NeoMatrix matrix = Adafruit_NeoMatrix(32, 8, PIN,  NEO_MATRIX_TOP + NEO_MATRIX_LEFT + NEO_MATRIX_COLUMNS + NEO_MATRIX_ZIGZAG, NEO_GRB + NEO_KHZ800);\u003c\/pre\u003e\u003cp\u003eDon't forget, with 256 LEDs, you could use over 15A of current if you turn on all the LEDs on to white (which we really do not recommend because we don't think the flex PCB can handle that much current). Try to keep the current draw at undrer 5A, you can use our 5V 4A or 5V 10A power supply. For portable use, if you are drawing less than 3A, try out this 5V@3A UBEC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Flexible PCBs are not designed for repeated flexing! While we think this product may work in wearables or other situations where the matrix is bent around, we do not offer any guarantees or refunds if you end up cracking the LEDs or traces! This is for advanced users only, who already know how to use NeoPixels and are comfortable with the high current requirements and protecting the matrix from damage. There are no returns, refunds or replacements for damaged product. You cannot cut these panels into custom shapes as data\/power lines run through the entire body of the PCB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDon't forget to read our NeoPixel Uber guide for more information on how to care and feed your NeoPixels!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003e320mm x 80mm x 2mm \/ 12.6\" x 3\" x 0.08\"\u003c\/li\u003e\n\u003cli\u003eWeight (with IDC cables): 63g\u003c\/li\u003e\n\u003cli\u003eMay ship with either WS2812B or SK6812-based LEDs. They are the same functionality, look, color order and protocol\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281369148,"sku":"vbs1787257301725","price":71.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/flexible-8x32-neopixel-rgb-led-matrix-discontinued_1.jpg?v=1787257310"},{"product_id":"64x32-rgb-led-matrix-6mm-pitch","title":"64x32 RGB LED Matrix - 6mm pitch","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 64x32 RGB LED Matrix Panel (6mm pitch) is a bright, full-colour display with 2048 LEDs arranged in a 64x32 grid. Ideal for signs and animations, it connects easily to a Raspberry Pi or Arduino Mega and runs on a 5V power supply.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are normally used to make video walls. In New York, we see them on the sides of buses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory.\u003c\/p\u003e\n\u003cp\u003eThis version is the 6mm pitch 64x32 RGB LED Matrix. Please note, you cannot use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matricies and has plenty of RAM.\u003c\/p\u003e\n\u003cp\u003eThis is a lot like our 6mm Grid 32x32 RGB LED matrix panel, but it's twice as wide and looks superb from far way. If you are looking for a 64x32 matrix, but at a closer view range, check out our 3mm pitch, 4mm pitch, or 5mm pitch 64x32 RGB LED Matrices.\u003c\/p\u003e\n\u003cp\u003eThis matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.\u003c\/p\u003e\n\u003cp\u003eThese displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet).\u003c\/p\u003e\n\u003cp\u003eThese panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePanel weight with IDC cables and power cables: 544.31g\u003c\/li\u003e\n\u003cli\u003e5V regulated power input, 4A max (with all LEDs on)\u003c\/li\u003e\n\u003cli\u003eCompatible with M3 mounting screws\u003c\/li\u003e\n\u003cli\u003e5V logic level\u003c\/li\u003e\n\u003cli\u003e1\/16 scan rate\u003c\/li\u003e\n\u003cli\u003eIndoor display, 160 degree visibility\u003c\/li\u003e\n\u003cli\u003eDisplays are 'chainable'\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThere's a lot of LEDs! You may need up to 4A per panel. \u003c\/span\u003eWe suggest our 4A regulated 5V adapter\u003cspan\u003e and then \u003c\/span\u003econnecting a 2.1mm jack\u003cspan\u003e. Please check out our tutorials for more details!\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese displays require 13 GPIO pins to control. You may have to use consecutive or special pins, depending on the driver firmware. We'll be honest: folks who try to wire directly are usually not successful, it's easy to get confused and mis connect. For that reason, we strongly recommend a ready-to-go board or adapter that makes wiring as easy as plugging in the cables and powering with 5V.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 385mm x 190mm x 13mm\n\u003cul\u003e\n\u003cli\u003ePlease note\n\u003cul\u003e\n\u003cli\u003eThe back of the matrix will either be green or black\u003c\/li\u003e\n\u003cli\u003eThis product may come with one or two power connections\u003c\/li\u003e\n\u003cli\u003eThere may be a short coupling data cable installed in the centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of December 2, 2020 \u003c\/strong\u003ewe no longer include mounting screws or magnets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 64x32 RGB panel\u003c\/li\u003e\n\u003cli\u003e1x IDC cable\u003c\/li\u003e\n\u003cli\u003e1x plug in power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281467452,"sku":"vve1787257302734","price":56.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/64x32-rgb-led-matrix---6mm-pitch_1.jpg?v=1787257310"},{"product_id":"64x32-rgb-led-matrix-4mm-pitch","title":"64x32 RGB LED Matrix - 4mm pitch","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 64x32 RGB LED Matrix Panel (4mm pitch) features 2048 bright LEDs for vivid, full-colour displays. Designed for indoor use, it offers a wide 160° viewing angle and works best with boards like the Raspberry Pi or Arduino Mega. It runs on a 5V supply and is ideal for eye-catching signs or animations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of buses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory.\u003c\/p\u003e\n\u003cp\u003eThis version is the 4mm pitch 64x32 RGB LED Matrix. Please note, you cannot use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matrices and has plenty of RAM.\u003c\/p\u003e\n\u003cp\u003eThis is a lot like our 3mm pitch 64x32 RGB LED matrix panel, but The LEDs on this panel are farther apart (a 4mm pitch) so you won’t have to be really close to appreciate it. It's made to look good indoors, even with a wide-angle view (160 degrees), and look great in ambient light. If you are looking for a wider pitch for a farther view distance, check out our 6mm pitch 64x32 RGB LED Matrix or our 5mm pitch 64x32 RGB LED Matrix.\u003c\/p\u003e\n\u003cp\u003eThis matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back, there is a PCB with two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.\u003c\/p\u003e\n\u003cp\u003eThese displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet). It requires a high-speed processor and more RAM than the Arduino has!\u003c\/p\u003e\n\u003cp\u003eThese panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/7C45kgDycnw?si=pXVSQCrdoejuqAY7\u0026amp;start=222\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePanel weight with IDC cables and power cables: 252.8g\u003c\/li\u003e\n\u003cli\u003eCompatible with M3 mounting screws\u003c\/li\u003e\n\u003cli\u003e5V regulated power-input, ~4A max (all LEDs on)\u003c\/li\u003e\n\u003cli\u003e1\/16 scan rate\u003c\/li\u003e\n\u003cli\u003eIndoor display, 160 degree visibility\u003c\/li\u003e\n\u003cli\u003eDisplays are 'chainable' - connect one output to the next input - but our Arduino example code does not support this yet\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThere are a lot of LEDs! You may need up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorials for more details!\u003c\/li\u003e\n\u003cli\u003eThese displays require 13 GPIO pins to control. You may have to use consecutive or special pins, depending on the driver firmware. We'll be honest: folks who try to wire directly are usually not successful, it's easy to get confused and mis connect. For that reason, we strongly recommend a ready-to-go board or adapter that makes wiring as easy as plugging in the cables and powering with 5V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 255mm x 127mm x 15mm\u003c\/li\u003e\n\u003cli\u003ePanel weight with IDC cables and power cables: 252.8g\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThe back of the matrix will either be green or black\u003c\/li\u003e\n\u003cli\u003eThis product may come with one or two power connections\u003c\/li\u003e\n\u003cli\u003eThere may be a short coupling data cable installed in the centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 17, 2020\u003c\/strong\u003e we no longer include mounting screws or magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\nCAD Drawing\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\nDatasheet\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 64x32 RGB panel\u003c\/li\u003e\n\u003cli\u003e1x IDC cable\u003c\/li\u003e\n\u003cli\u003e1x plug in power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281500220,"sku":"sgx1787257303633","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/64x32-rgb-led-matrix---4mm-pitch_1.jpg?v=1787257312"},{"product_id":"64x32-rgb-led-matrix-3mm-pitch","title":"64x32 RGB LED Matrix - 3mm pitch","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 64x32 RGB LED Matrix Panel (3mm pitch) uses 2048 bright LEDs in a 64x32 grid for sharp, full-colour images. Ideal for indoor displays with a wide 160° viewing angle, it works best with boards like the Raspberry Pi or Arduino Mega and runs on a 5V power supply.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of buses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory.\u003c\/p\u003e\n\u003cp\u003eThis version is the 3mm pitch 64x32 RGB LED Matrix. Please note, you cannot use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matrices and has plenty of RAM.\u003c\/p\u003e\n\u003cp\u003eThis panel is a lot like our 4mm Grid 64x32 RGB LED matrix panel, but the LEDs on this one are a little closer together (a 3mm pitch) so you won’t have to stand as far away to appreciate it. It's made to look good indoors, even with a wide-angle view (160 degrees) and look great in ambient light. If you want a wider pitch for a farther viewing distance, check out our 6mm pitch 64x32 RGB LED Matrix or our 5mm pitch 64x32 RGB LED Matrix.\u003c\/p\u003e\n\u003cp\u003eThis matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.\u003c\/p\u003e\n\u003cp\u003eThese displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet).\u003c\/p\u003e\n\u003cp\u003eThese panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M3 mounting screws\u003c\/li\u003e\n\u003cli\u003e5V regulated power input @ ~4A (with all LEDs on)\u003c\/li\u003e\n\u003cli\u003e2000 MCD LEDs on 3mm pitch\u003c\/li\u003e\n\u003cli\u003e1\/16 scan rate\u003c\/li\u003e\n\u003cli\u003eIndoor display, wide visibility\u003c\/li\u003e\n\u003cli\u003eDisplays are 'chainable'\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThere are a lot of LEDs! You may need up to 4A per panel. \u003c\/span\u003eWe suggest our 4A regulated 5V adapter\u003cspan\u003e and then \u003c\/span\u003econnecting a 2.1mm jack\u003cspan\u003e. Please check out our tutorials for more details!\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese displays require 13 GPIO pins to control. You may have to use consecutive or special pins, depending on the driver firmware. We'll be honest: folks who try to wire directly are usually not successful, it's easy to get confused and mis connect. For that reason, we strongly recommend a ready-to-go board or adapter that makes wiring as easy as plugging in the cables and powering with 5V.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 191mm x 96mm x 15mm\u003c\/li\u003e\n\u003cli\u003ePanel weight with IDC cables and power cables: 189g\n\u003cul\u003e\n\u003cli\u003ePlease note\n\u003cul\u003e\n\u003cli\u003eThe back of the matrix will either be green or black\u003c\/li\u003e\n\u003cli\u003eThis product may come with one or two power connections\u003c\/li\u003e\n\u003cli\u003eThere may be a short coupling data cable installed in the centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 11, 2020 \u003c\/strong\u003eWe no longer include Magnetic Feet with this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpecs\u003c\/li\u003e\n\u003cli\u003eCAD Drawing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 64x32 RGB panel\u003c\/li\u003e\n\u003cli\u003e1x IDC cable\u003c\/li\u003e\n\u003cli\u003e1x plug in power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281598524,"sku":"vsd1787257305515","price":30.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/64x32-rgb-led-matrix---3mm-pitch_1.jpg?v=1787257313"},{"product_id":"dotstar-addressable-5050-warm-white-led-wintegrated-driver-chip-10-pack-3000k","title":"DotStar Addressable 5050 Warm White LED w\/Integrated Driver Chip (10 Pack ~3000K)","description":"\u003cp\u003eFor those of us who are maybe a little tired of rainbows, we now have 'smart LEDs' in monochrome! Make your own smart \u003cstrong\u003eWarm White\u003c\/strong\u003e \u003cstrong\u003eLED\u003c\/strong\u003e arrangement with the same integrated LED driver that is used in our new fancy DotStar strips.  Unlit, the color resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 24 bit high-frequency PWM. The phosphor helps diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right)\u003c\/p\u003e\u003cp\u003eThis tiny 5050 (5mm x 5mm) SMD LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. If you want to prototype with these, we recommend our 5050-size LED breakout PCBs, solder them on for a breadboard-friendly package\u003c\/p\u003e\u003cp\u003eThey're also a great upgrade for people who have loved and used NeoPixels for a few years but want to use the same kind of technology for monochromatic lighting. DotStar LEDs use generic 2-wire SPI, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required. They also have much higher PWM refresh rates, so you can do Persistence-of-Vision (POV) and have less flickering, particularly at low brightness levels.\u003c\/p\u003e\u003cp\u003eLike NeoPixels, DotStar LEDs are 5050-sized LEDs with an embedded microcontroller \u003cstrong\u003einside the LED\u003c\/strong\u003e. You can set the brightness of each of 3 individual cool white dies epoxied into the case. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or disconnect unwanted LEDs at the end. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs for you.\u003c\/p\u003e\u003cp\u003eAnother nice thing about DotStars is their high PWM rate. You only have to set the brightness data for each pixel LED once, and then the LED+built-in-chip will handle the PWMing. On NeoPixels, this PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses and if the strip is moving in any way.  DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComes in a package with 10 individual LEDs.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWe have a tutorial showing wiring, power usage calculations, example code for usage, etc. for DotStars Please check it out!\u003c\/strong\u003e Please note that the tutorial and code talk about RGB, but of course, this LED is just WWW, three individual white LEDs instead.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eSingle LED: 5mm x 5mm \/ 0.2\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eWe don't have any more specifics about this particular LED other than it is ~3000K color temp and seems to have 3 white LEDs in place of the normal Red\/Green\/Blue\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nSK9822 Datasheet \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281696828,"sku":"lve1787257306672","price":3.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/dotstar-addressable-5050-warm-white-led-wintegrated-driver-chip-10-pack-3000k_1.jpg?v=1787257314"},{"product_id":"adafruit-dotstar-led-strip-addressable-cool-white-30-ledm-6000k-discontinued","title":"Adafruit DotStar LED Strip - Addressable Cool White - 30 LED\/m (~6000K) [Discontinued]","description":"\u003cp\u003eMove over NeoPixels, there's a new LED strip in town! These fancy new DotStar LED strips are a great upgrade for people who have loved and used NeoPixel strips for a few years but want something even better. DotStar LEDs use generic 2-wire SPI, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required. They also have much higher PWM refresh rates, so  you can do Persistence-of-Vision (POV) and have less flickering, particularly at low brightness levels.\u003c\/p\u003e\u003cp\u003eMake your own smart \u003cstrong\u003eCool White\u003c\/strong\u003e \u003cstrong\u003eLED\u003c\/strong\u003e arrangement with the same integrated LED driver that is used in our DotStar or NeoPixel LED strips.  Unlit, the color resembles a yellow Starburst. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 24 bit high-frequency PWM. The phosphor helps diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right)\u003c\/p\u003e\u003cp\u003eHowever, unlike NeoPixels, these LEDs have 2 wires (input and output) for sending data - one clock pin and one data pin. That means you need two pins, not one, to control DotStars. \u003cstrong\u003eBecause the clock and data is separated, you can use any processor speed or type to control these strips, and you don't have to worry about being careful with the timing\u003c\/strong\u003e. Hardware SPI support is handy but not required. This makes them excellent for use with any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers\/microprocessors. It's very easy to port the library, and you can send data to the pixels at up to 32MHz clock rate!\u003c\/p\u003e\u003cp\u003eNeoPixel LEDs use 800 KHz protocol so specific timing is required. On NeoPixels, the PWM rate is 400 Hz, which works well but is noticeable if the LED is moving. In comparison, DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth. (we recommend DotStars if you can use them!) \u003c\/p\u003e\u003cp\u003eThis is the 30 LED-per-meter version of our DotStar strips, on white flex PCB. We also have this in Warm White and RGB full color.\u003c\/p\u003e\u003cp\u003eThe strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 1 LED. Solder to the 0.1\" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V 4A power supply that can drive a half meter or meter, a 5V\/10A supply that can drive a couple meters (depending on use) \u003cstrong\u003eYou must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThese strips come in 5 meter reels\u003c\/strong\u003e with a 4-pin JST SM connector on each end. \u003cstrong\u003eThese strips are sold by the meter\u003c\/strong\u003e! If you buy 5 meters at a time, you'll get full reels with two connectors. If you buy less than 5m, you'll get a single strip, but it will be a cut piece from a reel \u003cstrong\u003ewhich may or may not have a connector on it\u003c\/strong\u003e. If the piece comes from the end of the reel, the connector may be on the output end of the strip!\u003c\/p\u003e\u003cp\u003eTo wire up these strips we suggest picking up some JST SM plug and receptacle cables for the signal wires  For the power wires, you will also probably want a 2.1mm DC jack to wire in so you can connect one of our 5V wall adapters to power it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWe have a tutorial showing wiring, power usage calculations, example code for usage, etc. Please check it out!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eIf you are using our DotStar library, you'll need to change the initialization to tell it which you are using. Check the tutorial for details on how to do this! The LED colors are otherwise identical, you just have to pipe the data to it in a slightly different order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth (with weatherstripping): 14mm \/ 0.55\"\u003c\/li\u003e\n\u003cli\u003eWidth (w\/o weatherstripping): 10mm \/ 0.4\"\u003c\/li\u003e\n\u003cli\u003eThickness (with weatherstripping):  4mm \/ 0.16\"\u003c\/li\u003e\n\u003cli\u003e30 LEDs per meter\u003c\/li\u003e\n\u003cli\u003ePixel Pitch: 33mm \/ 1.3\"\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°C - 40°C\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -10°C - 50°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSK9822 Datasheet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Strips come with 4 solder points per segment, but the arrangement may vary depending on the supplier, so please check when soldering\/powering!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle LED: 5mm x 5mm \/ 0.2\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eWe don't have any more specifics about this particular LED other than it is 6000-6500K color temp and seems to have 3 white LEDs in place of the normal Red\/Green\/Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281860668,"sku":"lmv1787257307469","price":71.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/adafruit-dotstar-led-strip---addressable-cool-white---30-ledm-6000k-discontinued_1.jpg?v=1787257315"},{"product_id":"analog-rgbw-led-strip-rgb-plus-warm-white-60-ledm-3000k-4m","title":"Analog RGBW LED Strip - RGB plus Warm White - 60 LED\/m (~3000K) - 4m","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe RGB + Warm White Analogue LED Strip (60 LEDs\/m) combines vibrant colour with soft, warm white light for stunning, flexible illumination. Powered by 9–12 VDC, you can control all LEDs together using simple transistors or MOSFETs with PWM for colour mixing. Weather-resistant and cuttable every 5 cm, it’s ideal for art, décor, costumes, or creative lighting projects.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eA dream come true...an analogue LED strip with both RGB and Warm White LEDs...It's so........bbbeeeaaaaauuuttttiiiifuuulllll!!!\u003c\/p\u003e\n\u003cp\u003eThese LED strips are fun and glowy. There are 60 RGB and Warm White LEDs per meter - you can control the entire strip at once with any microcontroller and three transistors. The way they are wired, you will need a 9-12VDC power supply and then ground the R\/G\/B\/W pins to turn on the colours. Use any NPN or N-channel MOSFET (although the big, powerful kind is good for a large strip) and PWM the inputs for colour-mixing.\u003c\/p\u003e\n\u003cp\u003eThis is the 60 LED-per-meter RGB + Warm White version. We also have this in RGB + Cool White. We splurged and got the weatherproof kind with a white flexi PCB. Great for decorating your bike or art project, costuming or funky fashion.\u003c\/p\u003e\n\u003cp\u003eFor powering, a good 12V supply is key. The one we carry will do well for fixed installations. For portable use, we suggest a 8xAA battery holder\u003c\/p\u003e\n\u003cp\u003ePlease Note: these strips are weatherproof so they'll be more rugged than uncovered strips, but they are not tested for long term submersion in water, especially chlorinated water, or exposed to UV (e.g. sunlight) for extended periods of time. They are for indoor use or light outdoor use without direct sun\/water. That means you cannot put them into a pool, lake, aquarium, etc. The silk-screening and LED brightness of the strips may vary slightly from reel to reel\u003c\/p\u003e\n\u003cp\u003eYou can cut this stuff pretty easily with wire cutters, there are cut-lines every 5cm (3 LEDs each), and trim off the weatherproof cover. Solder to the 0.1\" copper pads, and you're good to go. Each group of 3 LEDs can draw up to ~80mA, for a max current draw of 1.6A per meter.\u003c\/p\u003e\n\u003cp\u003eThey come in 4 meter reels, and are sold by the meter! If you buy 4m at a time, you'll get full reels. If you buy less than 4m, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it. If the piece comes from the end of the reel, the connector may be on the output end of the strip!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/EsgKAawwT9A?si=JXpxKN_q5Ix_bZoy\u0026amp;start=161\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWidth of Strip: 14mm \/ 0.55\"\u003c\/li\u003e\n\u003cli\u003eThickness of Strip: 4mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003e60 LEDs per meter\u003c\/li\u003e\n\u003cli\u003ePixel Pitch: 16mm \/ 0.6\"\u003c\/li\u003e\n\u003cli\u003eSingle LED: 5mm x 5mm \/ 0.2\" x 0.2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Analogue RGBW LED Strip - RGB plus Warm White - 60 LED\/m - ~3000K - 4m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039281958972,"sku":"njv1787257308507","price":47.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/analog-rgbw-led-strip---rgb-plus-warm-white---60-ledm-3000k---4m_1.jpg?v=1787257316"},{"product_id":"dotstar-rgb-led-disk-240mm-diameter-discontinued","title":"DotStar RGB LED Disk - 240mm diameter [Discontinued]","description":"\u003cp\u003eBullseye! This disk is chock full of *255* Dotstar LEDs and it's BRIGHT! The \u003cstrong\u003eDotstar RGB LED Disk\u003c\/strong\u003e is sprinkled with digitally-addressable LEDs, comes on a white PCB with two 4 pin JST-SM connectors already soldered to it so it's ready to rock straight out of the box.\u003c\/p\u003e\u003cp\u003eThese are the same integrated LEDs that are used in our new fancy DotStar strips. This tiny 5050 (5mm x 5mm) SMD LED is the most compact way possible to integrate multiple bright LEDs to a design. Rather than NeoPixels, this disk uses DotStar LEDs, which use a 2-wire protocol that is less timing-specific and has high-frequency PWM for smoother color blending.\u003c\/p\u003e\u003cp\u003eLike NeoPixels, DotStar LEDs are 5050-sized LEDs with an embedded microcontroller \u003cstrong\u003einside the LED\u003c\/strong\u003e. You can set the color\/brightness of each LED to 24-bit color (8 bits each red green and blue). Each LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs. The PWM is built into each LED-chip so once you set the color you can stop talking to the disk and it will continue to PWM all the LEDs for you\u003c\/p\u003e\u003cp\u003eAnother nice thing about DotStars is their high PWM rate. You only have to set the 24-bit color data for each pixel LED once, and then the LED+built-in-chip will handle the PWMing of the red, green and blue. On NeoPixels, this PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses and if the strip is moving in any way.  DotStars have a 20 KHz PWM rate, so even when moving the disk around, you won't see the pixelation, the color blending is very smooth.\u003c\/p\u003e\u003cp\u003eYou'll need \u003cem\u003ea lot\u003c\/em\u003e of power to fully light up this disk, so be sure to pick of a 5V 10A power supply!\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWe have a tutorial showing wiring, power usage calculations, example code for usage, etc. Please check it out!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Shipping weight reflects UPS' new dimensional weight regulations.\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eAPA102C Datasheet\u003c\/li\u003e\n\u003cli\u003eDotstar RGB LED Disk Datasheet\u003c\/li\u003e\n\u003cli\u003eDisk Diameter: 242mm\u003c\/li\u003e\n\u003cli\u003eDisk Thickness: 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 187g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039282057276,"sku":"wyb1787257309460","price":107.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/dotstar-rgb-led-disk---240mm-diameter-discontinued_1.jpg?v=1787257317"},{"product_id":"dotstar-micro-leds-apa1022020-smart-smd-rgb-led-100-pack","title":"DotStar Micro LEDs (APA102–2020)- Smart SMD RGB LED - 100 pack","description":"\u003cp\u003eThese \u003cem\u003eincredibly small\u003c\/em\u003e surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of our digital DotStar strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are a mere \u003cstrong\u003e2mm x 2mm\u003c\/strong\u003e (way smaller than APA102-5050-RGB), which makes them pretty darn bitty, so they might be a little cumbersome to hand solder. SMT techniques with solder paste and hot air will work best here.\u003c\/p\u003e\u003cp\u003eThere are three LEDs inside, red, green, and blue. The RGB LEDs are controlled by a tiny chip that takes a 24-bit color level via the clock and data in and then does all the PWM control for you. So you just 'set' the color data once. Like DotStars (and the similar NeoPixels) you can chain them together, the output of one leading into the input of another for near-infinitely long strips.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComes in a strip of 100 pieces.\u003c\/strong\u003e Also available in a 10 pack!\u003cbr\u003e\u003cbr\u003ePlease note this is a surface-mount part! It is possible to solder thin wires to the pads, but it's designed for use on a SMD PCB. If you are not comfortable with hand soldering SMD parts, check out our other RGB LEDs such as the thru-hole ones or in pixels\/strips.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eRed color: 620-625 nm\u003c\/li\u003e\n\u003cli\u003eGreen color: 520-525 nm\u003c\/li\u003e\n\u003cli\u003eBlue color: 465-470 nm\u003c\/li\u003e\n\u003cli\u003eRed brightness @ ~20mA: 300-330 mcd\u003c\/li\u003e\n\u003cli\u003eBlue brightness @ ~20mA: 420-460 mcd\u003c\/li\u003e\n\u003cli\u003eGreen brightness @ ~20mA: 160-180 mcd\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of April 20, 2018\u003c\/strong\u003e we have updated to use a new version of the APA102-2020 LEDs with a \u003cem\u003edifferent brightness curve\u003c\/em\u003e - you may notice the LEDs are dimmer (but consistently so). Please update any firmware you have written to have brightness increased!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of Nov 24, 2019\u003c\/strong\u003e we have reverted \u003cem\u003eback\u003c\/em\u003e to the original LED chips - you may notice the LEDs are brighter (but consistently so). Please update any firmware you have written to have brightness adjusted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 2.0mm x 2.0mm x 0.9mm \/ 0.1\" x 0.1\" x 0.0\" \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46039310762044,"sku":"enk1787257748798","price":18.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/6985\/2220\/files\/dotstar-micro-leds-apa1022020--smart-smd-rgb-led---100-pack_1.jpg?v=1787257757"}],"url":"https:\/\/luxecladstore.shop\/collections\/leds.oembed","provider":"My Store","version":"1.0","type":"link"}